dbca doesn’t list diskgroups

This is an Exadata machine running GI version 18.3.0.0.180717 and DB version 12.1.0.2.180717. On one of the DB nodes while running dbca, it doesn’t list the diskgroups. it works fine on the other node.

I cheked the dbca trace and found that the kfod command was failing. I tried to run it manually and got the same error:

[oracle@exadb01 ~]$ /u01/app/18.0.0.0/grid/bin/kfod op=groups verbose=true
KFOD-00300: OCI error [-1] [OCI error] [Could not fetch details] [-105777048]

KFOD-00105: Could not open pfile 'init@.ora'
[oracle@exadb01 ~]$

I ran it with strace then:

[oracle@exadb01 ~]$ strace /u01/app/18.0.0.0/grid/bin/kfod op=groups verbose=true
execve("/u01/app/18.0.0.0/grid/bin/kfod", ["/u01/app/18.0.0.0/grid/bin/kfod", "op=groups", "verbose=true"], [/* 18 vars */]) = 0
brk(0) = 0x2641000
.
.
.
.
.
open("/u01/app/18.0.0.0/grid/dbs/ab_+ASM1.dat", O_RDONLY) = -1 EACCES (Permission denied)
geteuid() = 1003
open("/u01/app/18.0.0.0/grid/rdbms/mesg/kfodus.msb", O_RDONLY) = 13
fcntl(13, F_SETFD, FD_CLOEXEC) = 0
lseek(13, 0, SEEK_SET) = 0
read(13, "\25\23\"\1\23\3\t\t\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"…, 280) = 280
lseek(13, 512, SEEK_SET) = 512
read(13, "\352\3\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"…, 512) = 512
lseek(13, 1024, SEEK_SET) = 1024
read(13, ".\1=\1E\1M\1X\1\352\3\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"…, 512) = 512
lseek(13, 1536, SEEK_SET) = 1536
read(13, "\n\0d\0\0\0D\0e\0\1\0e\0f\0\1\0\230\0g\0\1\0\306\0h\0\2\0\325\0"…, 512) = 512
fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 3), …}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f43f85f2000
write(1, "KFOD-00300: OCI error [-1] [OCI "…, 78KFOD-00300: OCI error [-1] [OCI error] [Could not fetch details] [-132605848]
) = 78

The text in bold just before the kfod error caught my attention. When I checked actually oracle user wasn’t able to read the file. The permissions looked like this:

[root@exadb01 dbs]# ls -ltr
total 20
-rw-r--r-- 1 oragrid oinstall 3079 May 14 2015 init.ora
-rw-r--r-- 1 oragrid oinstall 587 Dec 12 15:33 initbackuppfile.ora
-rw-rw---- 1 oragrid asmadmin 1656 Dec 20 14:26 ab_+ASM1.dat
-rw-rw---- 1 oragrid oinstall 1544 Dec 20 14:26 hc_+APX1.dat
-rw-rw---- 1 oragrid oinstall 1544 Dec 21 16:57 hc_+ASM1.dat
[root@exadb01 dbs]#

Whereas on node2 they were like:

[oracle@exadb02 dbs]$ ls -ltr 
total 16
-rwxrwxrwx 1 oragrid oinstall 3079 Dec 12 14:52 init.ora
-rwxrwxrwx 1 oragrid oinstall 1544 Dec 21 16:57 hc_+ASM2.dat
-rw-rw---- 1 oragrid oinstall 1720 Dec 21 16:57 ab_+ASM2.dat
-rwxrwxrwx 1 oragrid oinstall 1544 Dec 21 16:57 hc_+APX2.dat
[oracle@exadb02 dbs]$

Since oracle user isn’t member of asmadmin group, it is not able to read the mentioned file. Changing the owner to oragrid:oinstall fixed the issue.

One thought on “dbca doesn’t list diskgroups

  1. Martin Decker

    Sidhu,

    normally, the oracle rdbms binary executeable ownership is modified by “setasmgidwrap” tool.

    After applying any patches on RDBMS Home, the setasmgidwrap has to be run (with rdbms instance offline)

    as user oragrid:
    /u01/app/18.0.0.0/grid/bin/setasmgidwrap o=$ORACLE_RDBMS_HOME/bin/oracle

    Regards,
    Martin

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *